Linear Positioner-25mm (X-Slim)
This set of linear positioners, all with 25.4*25.4 mm bottom size, are desigened and teseted for low temperature, vacuum and magnetic environments.
LINEAR STAGE 25*25*10 MM
The LS25-X-Slim ( Cryogenic Bearing Stage ) is a robust linear stage for all-round applications in a cryo-vacuum and will run both horizontally and vertically (not recommend). The combination of long range stepping motion and short range scanning offers nm positioning over the full range. The use of non-magnetic materials allows operation in high magnetic fields. It is equipped with resistive encoder whose location repetability is 1-2 um.
# KEY FEATURES
Closed-loop 200 nm resolution Load 1000 g Travel Range 6 mm Max dynamic force 1 N Motion Slide Speed (300K) Max 2mm/s
Outgassing
Ultra-high Vacuum
Temperature
1.4 K
Magnetic Field
16 Tesla
Control
Closed-loop
Materials
Ti & BeCu
DATASHEET
CONTROL MODE – CLOSED LOOP
Encoder Resistive type
Sensor Resolution 200 nm
Repeatibility of sensor 1-2 um
SIZE & DIMENSIONS
Size & Dimensions 25.4 mm*25.4 mm*9.5 mm
MATERIALS (NON-MAGNETIC, ULTRA-HIGH VACUUM)
Frame Pure Ti & BeCu
Actuctor PZT
Wires Insulated Copper
PIns 5 pins
STEP MODE
Drive Voltage Max 200V
Walk Frequency Max 10kHz
Travel Range 6mm
Typical Step Size 70 nm
Max Drive Velocity (300K) approx. 2mm/s
LOAD
Max Vertical Load 10N (1kg）
max. dynamic force
along the axis (300K) 1N
DRAWS (MM)
压电位移台控制器
6-CHANNELS CONTROL OUTPUT
MAX -200 V TO 200 V
1 HZ TO 10 KHZ
CLOSED-LOOP MODULAR INTEGRETED
About the positioner cotroller system
This Positioner controller system is for all positioner products. This controller consist of a 19” desktop Base Cabinet. and can fit up to 6 function specific modules (brochures for each available module can be found below). The CAB includes a Power Supply Unit as well as a USB HID and Ethernet LAN connection for communication with a desktop computer. Control software for PC (WindowsTM OS) can be downloaded for free .
