Linear Positioner-25mm (Z-Pro)
This set of linear positioners, all with 25*25 mm bottom size, are desigened and teseted for low temperature, vacuum and magnetic environments.
LINEAR STAGE 25*25*16.5 MM
The LS25-Z-Pro ( Cryogenic Bearing Stage ) is a robust linear stage for all-round applications in a cryo-vacuum and will run vertically. The combination of long range stepping motion and short range scanning offers nm positioning over the full range. The use of non-magnetic materials allows operation in high magnetic fields. It is equipped with resistive encoder whose location repetability is 1-2 um.
Ti & BeCu
Encoder Resistive type Sensor Resolution 200 nm Repeatibility of sensor 1-2 um
Size & Dimensions 25mm*25mm*16 mm
Frame Pure Ti & BeCu Actuctor PZT Wires Insulated Copper PIns 7 pins
Drive Voltage Max 200 V Walk Frequency Max 10 kHz Travel Range 6 mm Typical Step Size 70 nm Max Drive Velocity (300 K) approx. 2 mm/s
Max Vertical Load 3 N (0.3 kg） max. dynamic force along the axis (300K) 3 N
6-CHANNELS CONTROL OUTPUT
MAX -200 V TO 200 V
100 HZ TO 10 KHZ
CLOSED-LOOP MODULAR INTEGRETED
About the positioner cotroller system
This Positioner controller system is for all positioner products. This controller consist of a 19” desktop Base Cabinet. and can fit up to 6 function specific modules (brochures for each available module can be found below). The CAB includes a Power Supply Unit as well as a USB HID and Ethernet LAN connection for communication with a desktop computer. Control software for PC (WindowsTM OS) can be downloaded for free .